Edixion Offset

EDIXION OFFSET

Edixion Offset is the uncoated offset paper ideal for your long-run printing jobs, while respecting the environment.

Key Features
- Excellent whiteness
- High bulk
- High opacity
- Consistent high smooth surface
- Outstanding runnability

Setup
Store the paper in the printing room for 24 to 48 hours before printing so that the temperature is balanced between the paper and the room when printing. Ideal press room conditions should be 50% +/-5% relative humidity at 20°C.
Outer wrappers should be removed only when ready to print.
Slitting: keep the paper grain (// to the large side) perpendicular to the printing direction.

Pre-printing
Large printed surface: under color-removal necessary.
Intense full colors.
- Black: blue support (40%) recommended.
- Colours: for dot areas over 320%, one or several Under Colour Removals are recommended.
Screen ruling: suitable with all existing half tone technologies ; Recommended = 52 lines / cm (133 lines per inch).

Printing
Inking: conforming to the intensity of the proof ; suitable with any good quality ink.
Switching: 30 minutes to 2 hours after printing.

Finishing
UV varnish, embossing, die-cutting.
Lamination: foil lamination > 130gsm

Forming
Folding: parallel to the paper grain ( // to the large side).
Scoring:
- Pre-creasing before folding is recommended from 135gsm, scoring with counterpart.
- from 200gsm: wider scoring in the back of the pleat.
Cutting: wait 24 hours after printing.

 
 
 

Technical datasheet

• Technical Data Sheet Edixion Offset (English)